Posts Tagged ‘industrial; steam; steam leak repair’
LLFA® Tape used to seal a STEAM LEAK on a low pressure steam drain line at Nuclear Power Plant.
After GTG provided electronic information, verbal information and installation instructions, the Nuclear Power Plant personnel successfully sealed the above steam line leak. Below is an excerpted email from the Power Plant. “We spoke a few months ago regarding the use of your product here on site. With your help, we were able to get it…
Read MoreTurbine Oil Leak Repair, with LLFA Tape, made by JEA Northside Generating Station in Florida, USA
During an LLFA Tape demonstration, performed by GTG Engineering, Inc. at JEA, Northside Station, a request was made to repair a turbine oil leak. The leak was at the interface of a smaller diameter externally threaded pipe into a larger diameter internally (female) threaded pipe that was associated with a Primary Air Fan for a…
Read MoreLLFA Tape Used to Secure Industrial Steam Leak
In an industrial oil pipeline, a high temperature leak occurred. Pressure and temperature of saturated steam is directly proportional to each other; the higher the temperature, the greater the pressure. [163 ° C saturated steam pressure is 0.6MPa; 260 ° C, saturated steam pressure is 4.7MPa]. The LLFA Tape has a stable operating temperature that…
Read More